Salt Chlorinators Q&A

Question 1

Will this work with a Hayward system? My current cell communicates with the computer on my system. View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 2

Should I bring salt generator inside for the winter View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 3

I have a section of pvc pipe that is 13" in length in the correct location for a salt cell generator. Does this 13" length give me enough space to plumb the unions and the Core-35? Thank you. View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 4

I just installed the core 35 and it works great. My pump is on a timer and my generator is plugged in. When the pump turns off the unit shows "no flow". Is it ok to just leave it on with the no flow indicator or will cause a problem with my generator ? I have no problem hard wiring it to the timer, do I just cut the plug off and wire to timer ? or is there a separate power cable sold for hard wire to timer ? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 5

Can the product be installed vertically as well as horizontally? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 6

Can the unit be installed vertically? Video shows horizontal installation. View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 7

how many amps does the unit pull View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 8

my current set up is for an intellichlor Model IC40. Will this fit in where the old salt cell used to be? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 9

Does this eliminate the need for big bags of salt to put in a salt water pool? Or does it actually use it & recycle it to avoid spending more of the salt bags? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 10

How long will the cell last before replacement? Also, how often would I have clean this system? Do you sell a product that will reduce corrosion due to saltwater? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 11

Can you use the system with an aluminum above ground pool. View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 12

I have a CircuPool Core-35 that has calcium build up on the cell. How do i clean this ? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 13

what do you do in the winter in California? its says cold water and my pool is growing yellow algae ? is there an override? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 14

How often is the cell cleaned and how long does it take to replace it View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 15

can a timer be put on the Core chlorinators? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 16

when and if the cell goes bad do you just replaes the cell or the whole unit? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 17

I recently purchased a house with an inground pool that is approximately 10 to 11,000 gallons. I want to convert it from chlorine to a saltwater system and am decided to go with the circu pool core 35 system. My question is does the salt system go in place of where my chlorine feeder is now? Any info would be appreciated as I plan on installing myself and do not want to damage anything. I can also include a picture however it will not let me upload it in this question section. View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 18

I have an above ground pool with 9000 gallons of water. 12x24x52 above ground. I am looking to purchase the core -35. Is this going to be to much for this size of pool? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 19

Does this work inline vertically? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 20

Are the core and edge salt systems self cleaning or do they still need to be disassembled and cleaned from time to time? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 21

What is the length of the elec.cord for plug in View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 22

Will this replace the Jandy/Zodiac Aquapure 1400 View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 23

Power used in 110v mode and 220v mode View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 24

do you have an adapter to replace a Hayward salt cell and fit in same space? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 25

I currently have a Classic RJ unit in need of replacement. Will the Core 35 match up with my current plumbing or will I need some sort of adapters? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 26

I am interested in purchasing a CircuPool Core55 SWCG system through Discount Pool. Can you verify that these units carry the EC (Trade Grade) certification. Also, if I replace my current Pentair IC30 SWCG with a CircuPool Core55 unit what plumbing adaptor kit (if any) should i purchase? Thanks View answer

Asked 11 ´months ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 27

Due to limited space, I only have two places where a CORE system would fit and it seems neither option is very good. (1) The unit controls will bump my filter if situated above the pvc. It would fit if placed at a 45 degree angle. Is this an option? (2) The unit can be installed along a vertical section of pvc before my in-floor cleaning system actuator. The unit would be in a section of vertical pvc instead of horizontal. Is this an option? Thank you. View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 28

Can the Core system be installed on a pipe vertically or should it only be installed horizontally? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 29

Will the temperature of the water damage the CORE-35? I was told that most salt chlorinators will be ruined if they are ran when water is under 70 degrees. Seemed odd but figured it was worth asking. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 30

How much clearance doI need between the pipe and the ground for install? I was planning on placing this unit where my chlorine tablet tier is located, but it runs pretty close to the ground. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 31

Is the Core 35 weather proof. It will outside in the elements (No snow) just heat, rain, and humidity. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 32

What are the main differences between the RJ-30 Plus and Core-35 (aside from size and warranty)? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 33

Can this unit be used with a Pentair VS pump? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 34

Is a bypass fitting available for this unit? If not, can I build my own using the male ends from standard 2" pvc unions? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 35

Where is the installation manual for this? I run my pump 24/7. Can i hardwire so that there is power to the unit only when the pump is on?Amanda View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 36

Can the CORE35 be used for an above ground pool? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 37

What is the power cord length? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 38

How long is power chord? Also my unit comes out of the pool heater and runs parallel to ground. Will I need to raise this line to install . I can send pics if needed. Pool is 46k gallons. in ground View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 39

Do you have the 1.5” reducers? My lines are 1.5” View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 40

Please advise the distance from end to end of your couplings so I can see if this will fit where my stabilizer unit is located. Also the size of the coupling ?Thank you View answer

Asked 7 ´years ago | Salt Chlorinators > AutoPilot Digital Nano + with PPM2 (RC-28) Electronic Chlorine Generator

Question 41

1. Is there a minimum flow value for the T-9 - gpm, cfs?2. What is the acceptable pressure range for the T-9 View answer

Asked 4 ´years ago | Salt Chlorinators > Hayward Aqua Rite W3 AQR9 (W3 T-Cell-9) Salt Chlorine Generator

Question 42

If you don't use acid to clean the cell, how do you clean the cell? I need to replace my Pentair Intellichlor that never lasts more that 1-2 years with regular (every 6 weeks) cleaning with acid. View answer

Asked 1 ´year ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 43

how to estimate size of pool View answer

Asked 1 ´year ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 44

What does the yellow light mean on an SJ55 salt system? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 45

I have a variable speed pump with built in timer. Do I need a timer for the SJ-55 also or will it shut itself off when the water stops moving ? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 46

Will this unit work with a variable speed pump on very low speed (1000 rpm) ? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 47

will this work with 2.5 inch piping? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 48

what size are the openings on the cell one and a half inch or two inch? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 49

Do I need the sacrificial anode for my system and does one come with the SJ-55 salt system? View answer

Asked 8 ´years ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 50

I have an above ground pool and my pump uses 110v power, will this work for me? View answer

Asked 8 ´years ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Salt Chlorinators Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools